SIG_MESH_Release 2.7.2串口调试问题

Discussions on BLE related products, including standard BLE devices, BLE mesh, and Apple HomeKit products
Post Reply
yufeng
Posts: 4
Joined: Thu Aug 16, 2018 11:31 am

Wed Mar 20, 2019 3:28 pm

怎样使用串口打印log进行调试,谢谢!
TL_Rick
Posts: 8
Joined: Mon Jun 19, 2017 3:55 pm

Sat Mar 23, 2019 10:45 am

打开串口打印的宏即能支持,具体请你的FAE指导。
liangaliang
Posts: 8
Joined: Wed Jul 05, 2017 9:20 am

Mon Mar 25, 2019 4:37 pm

TL_Rick wrote:
Sat Mar 23, 2019 10:45 am
打开串口打印的宏即能支持,具体请你的FAE指导。
估计能问FAE就不会到这个论坛提问啦!就是没有FAE才来提问的
TL_yuzhong
Posts: 19
Joined: Tue Mar 07, 2017 11:20 am

Mon Mar 25, 2019 5:43 pm

串口的使用流程都类似,可以参考uart.c里面的函数,如果一定要找个实际例程,那可以参考http://wiki.telink-semi.cn 里面的826x_ble_sdk v3.2 ,有个透传模组,用的是串口。同样这个V3.2的SDK在论坛上也有,但wiki那个条理性更好,方便找资料。
Post Reply