TelinkSigMesh ios app 出现 x cm busy问题

Discussions on BLE related products, including standard BLE devices, BLE mesh, and Apple HomeKit products
Post Reply
zr@skyrc.cn
Posts: 1
Joined: Thu Mar 21, 2019 5:30 pm

Wed May 08, 2019 2:08 pm

ios app调用SendOpByINI 方法 给设备发送一条指令之后,设备应答后马上在发下条指令 app就打印tx cm busy 。要隔1到2秒在发下条指令才能正常 。不知道这个问题能不能解决
TL_shengang.ding
Posts: 13
Joined: Wed May 10, 2017 1:51 pm

Thu May 16, 2019 10:32 am

如果这个ini指令需要response的,需要收到目标地址的response后才可以下发新指令,因此立刻发送下一条指令的话app就打印tx cm busy ,这个是正常的的。需要确认你下发的指令是否是需要response 的指令。
Post Reply